IBM Infoprint 6500 Quick Start Manual page 36

Load the Ribbon
|
Ribbon Spool
Left Hub
Ribbon Loading
Instructions
(For future reference)
|
|
Figure 24. Threading the ribbon around the Ribbon Guide
|
6. Thread the ribbon around the ribbon guide and along the ribbon path. Be
7. Place the full spool on the left hub.
|
8. Press the spool down until the hub latch snaps into place.
9. Turn the left spool by hand to make sure the ribbon tracks correctly in the
26
Infoprint 6500 Quick Start Guide
sure to thread the ribbon between the hammer bank cover and the ribbon
mask.
ribbon path and around the ribbon guides.
A
Hammer
Bank Cover
Ribbon Mask
A
Ribbon Guide
(both sides)