|
|
|
Figure 4. Removing Sample Configuration Printout
|
3. Open the blue tractor doors.
4. Push the blue tractor locks down.
5. Raise the forms thickness lever to the fully open (raised) position.
6. Remove the envelope that contains the sample configuration printout.
7. Store the envelope in the pouch attached to the left interior side of the
8. Remove the cardboard packing.
Envelope
cabinet.
A
Blue Tractor
Lock (2)
Remove Packing Materials
Blue Tractor
Door (2)
A
Platen Lever
Basic Operating Procedures
5