IBM Infoprint 6500 Quick Start Manual page 30

Line matrix printers, cabinet and pedestal models

Hide thumbs Also See for Infoprint 6500:

Table of Contents

Connect the Interface and Power Cables

Figure 17. Removing the I/O Cover

Figure 18. Routing the I/O Cable

4. Locate the notch in the lower-left corner of the back of the cabinet.

5. Hold the I/O cable below its connector, and gently push the cable

Infoprint 6500 Quick Start Guide

Open the rear cabinet door and remove the I/O cover from the selected

I/O connector.

through the opening in the grommet seated in the notch. Refer to the

IBM Infoprint 6500 Line Matrix Printers: User's Manual for recommended

cables.

Table of Contents