Canon LV-WX300 User Manual page 27

The final connection path should be like that shown in the following diagram:
AV device
• If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and operating
correctly. Also check that the signal cables have been connected correctly.
• You need only connect to this device using a composite Video connection if Component Video
and S-Video inputs are unavailable for use. See
for details.
Video cable (option)
Audio cable (option)
LV-S300
LV-X300/LV-WX300
"Connecting Video source devices" on page 24
Speakers
Audio
cable
(option)
27