Canon LV-WX300 User Manual page 16

Remote control: LV-RC08
1
2
3
4
5
6
7
1. POWER (ON/STANDBY)
I
I
Toggles the projector between standby mode and
on. See "Starting up the projector" on page 28
"Shutting down the projector" on page 42
details.
2. INPUT
Displays the source selection bar. See
input signal" on page 32
3. Left
Selects the desired menu items and makes
adjustments. See
details.
4. BLANK
Used to hide the screen picture. See
image" on page 41
5. TIMER
Activates or adjusts some basic settings of an on-
screen timer. See
40 for details.
6. D.ZOOM (+, -)
Magnifies or reduces the projected picture size.
See "Magnifying and searching for details" on
page 35 for details.
16
8
9
10
11
12
13
9
14
"Switching
for details.
"Using the menus" on page 29
"Hiding the
for details.
"Using the TIMER key" on page
7. MUTE
Temporarily mutes the audio. See
sound" on page 42
8. MENU
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and saves
menu settings. See
for details.
9. Keystone/Arrow keys (
Manually corrects distorted images resulting from
an angled projection. See
page 34
10. AUTO PC
Automatically determines the best picture timings
for the displayed image. See
image" on page 33
11. Right/
Activates panel key lock. See
and
keys" on page 41
for
When the On-Screen Display (OSD) menu is
activated, the #3, #9 and #11 keys are used as
directional arrows to select the desired menu items
and to make adjustments. See
on page 29
12. FREEZE
Freezes the projected image. See
for
image" on page 41
13. OK/IMAGE
Enacts the selected On-Screen Display (OSD)
menu item.
Selects an available picture setup mode. See
"Selecting a image mode" on page 37
14. VOLUME keys (+, -)
Adjusts the sound level. See
on page 42
for details.
"Using the menus" on page 29
/ Up,
"Correcting keystone" on
for details.
"Auto-adjusting the
for details.
"Locking control
for details.
"Using the menus"
for details.
for details.
"Adjusting the sound"
for details.
"Adjusting the
/ Down)
"Freezing the
for details.