Table of Contents
Advertisement
Rear Panel
1
1. Camera In: Camera input ports for Camera Octopus Cables*.
2. Video: BNC port for a Spot Monitor.
3. Audio In: Two 3.5" RCA jacks for audio input (Y-cables included); the left port is for audio channels 1
and 2, the right port for audio channels 3 and 4.
4. Audio Out: RCA port for audio output (mono).
5. DVI: DVI output for connecting to a DVI monitor: use a DVI-to-VGA adaptor to connect to a VGA
monitor.
6. USB 2.0 Ports (x2): Connect external USB hard drives or external CD-RW/DVD-RW drives for system
backup; connect USB flash drive for to install firmware updates.
7. Ethernet: Networking port for a 10/100 Base-T RJ-45 network cable.
8. Alarm/Sensor/RS485: Connection block for alarms and sensor; connection for an RS485 PTZ
camera
9. DC 12V: Port for 12V DC 5A power adaptor cable (included).
*Channel port 9-16 only available on 16-channel models.
3
2
4
5
6
8
7
Rear Panel
9
9
Advertisement
Table of Contents
