Table of Contents
Advertisement
Using the System
Using the System
Note: Make sure all cameras and cables are properly connected prior to powering on the
system.
Starting the System
Press the POWER button on the front panel to turn the system ON/OFF.
At startup, the system performs a basic system check and runs an initial loading sequence.* After
a few moments, the system loads a live display view.
Figure 2.0 Initial startup screens
Password
You do not have to enter a password upon initial startup. However, for security measures, you
should change your ADMIN and user passwords after first purchasing the system. See
"ADVANCED SETUP" on page 50.
Figure 2.1 Passwords
*The system may perform "Time Trimming" at startup. This is a normal function that the system uses to correct its internal clock.
12
Advertisement
Table of Contents
