Radius Settings - Planet WNAP-6300 User Manual

wireless port and LAN is on wired port when device is set to system Router mode.
Bridge mode and AP + Bridge mode are similar to AP mode when device is set to
Router mode; WAN is on wired port and LAN is on wireless port. Thus users must also
connect. WNAP-6300 with another wireless device before it is set to Router mode and
access WNAP-6300 via the connected wireless device.

3.5 RADIUS Settings

RADIUS (Remote Authentication Dial-In User Service) is a server for remote user authentication and
accounting; playing a central role in the network in providing the capabilities of authenticating,
authorizing, accounting, auditing, alarming and etc. It allows an organization to maintain user profiles
in a central database that all remote servers can share.
Open "RADIUS Settings" in "System" to make RADIUS configuration.
Authentication RADIUS Server
This is for RADIUS authentication. It can communicate with RADIUS through IP Address, Port and
Shared Secret.
IP Address: Enter the IP address of the Radius Server;
Port: Enter the port number of the Radius Server;
Chapter 3 Basic Settings
Figure 17 RADIUS Settings
Page 20