Table of Contents
Advertisement
4. Install the mounting studs 2 and bumpers 3 that come in the monitor mounting hardware package.
Figure 7. Installing the flat panel monitor in the keyboard tray
Note: Clean the installation area on the keyboard tray with a suitable cleaning agent, such as
alcohol, before installing the rubber bumpers on the front of the keyboard tray.
5. Open the flat panel monitor 1 to its full upright position and align the grooves in the stand with the
mounting studs 2 in the keyboard tray. When the monitor stand is sitting inside the keyboard tray,
slide it towards the back until it stops.
Note: Install or remove the flat panel monitor only when the display is in its upright position.
6. Secure the monitor stand in the back of the keyboard tray with the two provided screws 4 .
6
Flat Panel Monitor Rack Mount Kit II Installation Instructions
Advertisement
Table of Contents
