Toshiba RAS-M10GDCV-E Service Manual page 37

9-9. Connection of Electric Wires
When you connect the wires to the terminals, be sure to loosen the parts box before work.
If an incomplete connection is done, a contact failure may be caused and resulted in a danger of an electric
shock and so on.
Work under condition that the parts box is loosened :
Correct way
9-10. Voltage Setting
The most suitable voltage can be set up by combining the VOLTAGE SELECT 1 with 2 when adjusting the voltage
on the spot.
(Do not touch the switches at the installation time because an installation dealer will adjust them.)
TEMPORARY
COOL AUTO
VOLTAGE1
220V/230V
VOLTAGE2
220V
indoor unit
Flat view
AUTO RESTART
OFF ON
240V
REMOCON
230V A B
Work under condition that the parts box is fixed :
Supply voltage
220V
230V
240V
– 37 –
indoor unit
Incorrect way
Voltage select 1/Voltage select 2
VOLTAGE1
220V/230V 240V
VOLTAGE2
220V
VOLTAGE1
220V/230V 240V
VOLTAGE2
220V
VOLTAGE1
220V/230V 240V
VOLTAGE2
(Both are available.)
220V 230V
220V 230V
Flat view
230V
230V