Auto Restart Function - Toshiba RAS-M10GDCV-E Service Manual

8-5. Auto Restart Function

This unit is equipped with an Automatic restarting function which allows the unit to restart and resume the set
operating conditions in the event of a supply power shutdown without the use of the remote controller.
The operation will resume without warning three minutes after the power is restored.
The AUTO RESTART FUNCTION is not set to work on ship-
ment from the factory, and so it is necessary to set it to func-
tion as required.
HOW TO SET THE AUTO RESTART
To set the auto restart function, proceed as follows:
OPERATION
Slide the slide switch to AUTO RESTART ON side.
TEMPORARY
COOL AUTO
• The Auto Restart function will not accept an instruction if timer operation with the remote controller is selected.
(Please refer to the section of setting the timer operation.)
HOW TO CANCEL THE AUTO RESTART
To cancel the AUTO RESTART function, proceed as follows:
The system will now be required to manually restart with the remote controller after the main supply is returned.
OPERATION
Slide the slide switch to AUTO RESTART OFF side.
TEMPORARY
COOL AUTO
INFORMATION
AUTO RESTART
OFF ON
AUTO RESTART
OFF ON
When you set to "ON" position of Auto restart, Beep,
Beep, Beep sound (3 times) are heard.
(During power supply to the unit)
When power supplying returns, system will be restart
automatically.
When you set to "OFF" position of Auto restart, Beep,
Beep, Beep sound (3 times) are heard.
(During power supply to the unit)
When power supplying returns, system will not be
restart automatically.
– 20 –
TEMPORARY AUTO RESTART
COOL AUTO
VOLTAGE1
220V/230V 240V
VOLTAGE2 REMOCON
220V 230V A
MOTION
MOTION
OFF ON
B