Toshiba e-studio 165 Printing Manual page 46

2 INSTALLING CLIENT SOFTWARE
— Windows NT 4.0
Configuring the LPR port for Windows NT 4.0
You must log into Windows as a user who has the "Administrators" or "Power Users" privi-
lege when using Windows NT 4.0.
The procedure to configure the Raw TCP or LPR port differs depending on the version of
Windows used.
1
Install the client software using the installer in the Client Utilities
CD-ROM.
The procedure how to Install the client software is basically the same as for Windows
2000/XP/Server 2003. Please see to the following page for installation. Then, proceed to
the next step to configure the LPR port:
P.36 "Installing the client software using the installer for Windows 2000/XP/Server
2003"
The installer discovers this equipment and the following screen is displayed: In this
screen, click "Local Port" and select "LPT:1" in the drop down box. Then click [Next].
The subsequent installation procedure is the same as for Windows 2000/XP/Server
2003.
Even if you click [Next] without selecting "Local Port" and continue the installation pro-
cedure, Windows NT 4.0 is not correctly installed.
2
After installing the client software, click [Start], select [Settings],
and click [Printers] to open the Printers folder.
46 Installing Client Software for Windows