Toshiba e-studio 165 Printing Manual page 198

3 PRINTING
4
If you want to print or insert a front cover, check the "Use Front
Cover" box and then select, at the "Source" drop down box, the
drawer where the front cover is loaded. Also, at the "Print Style"
drop down box, select whether you are inserting a blank cover or
printed front cover. Then select the paper type for a front cover at
the "Paper Type" drop down box.
Print Style
This selects how you want to print a cover.
-
-
-
Paper Type
This sets the media type of the paper.
-
-
-
-
When "Automatic" is selected in the "Source" drop down box, the paper is automati-
cally selected according to the printed document size.
"Print on both sides of page" is available only when 2-Sided printing is enabled at the
Setup tab.
The same paper type applies to both front cover and back cover. When the paper
type for either cover is changed, the paper type for other cover is automatically set to
the same one.
198 Printing from Windows
Do not print on page — Select this to insert a blank cover.
Print on 1 side of page — Select this to print the first page image on the front
side of a cover.
Print on both sides of page — Select this to print the first two page images on
both sides of a cover.
Plain — Select this when printing on 20 lbs plain paper (64-80 g/m
Thick1 — Select this when printing on 24-28 lbs thick paper (81-105 g/m
paper).
Thick2 — Select this when printing on 32-90 lbs thick paper (106-163 g/m
paper).
Transparency — Select this when printing on transparent sheets.
2
plain paper).
2
thick
2
thick