Av-In1/Av-In2 Controls - Jensen VX3010 Operating Instructions Manual

VX3010

AV-In1/AV-In2 CONTROLS

AV-In1
AV-In1 is used for playback of audio/video from an external device connected to
the unit through a 3.5mm jack located on the font panel.
AV-In2
AV-In2 is used for playback of audio/video from an external device connected
through RCA connectors located on the back of the unit.
You can connect an external audio/video device to the unit.
1. Connect the external device with an appropriate AV cable.
2. Touch the upper left corner to display the main menu.
3. Touch [Aux 1] / [Aux 2] to access external device.
NOTE: Audio/Video device must be connected to the unit using an audio/video
adapter cable that is available separately.
NOTE: Video will only play when the vehicle parking brake is engaged. The parking
brake must be connected for this feature to operate.
128-9270 VX3010 Operating Instructions 02 20 2014.indd 39
Figure 30. Connecting External Devices
Right Audio
1
Left Audio
2
Ground
3
V ideo
4
3.5mm A/V Cable (not included)
39
2/20/2014 5:55:43 PM