Av-In1/Av-In2 Controls - Jensen VX3012 Operation Manual

AV-In 1 / AV-In 2
AV-In 1
AV-In 1 is used for playback of audio/video from an external device connected
to the unit through a 3.5mm connector located on the front panel.
AV-In 2
AV-In 2 is used for playback of audio/video from an external device connected
through RCA connectors located on the back of the unit.
You can connect an external audio/video device to the unit.
1. Connect the external device with an appropriate AV cable.
2. Touch the upper left corner to display the main menu.
3. Touch [Aux 1] / [Aux 2] to access external device.
NOTE: Audio/Video devices must be connected to this unit using an audio/
video adapter cable that is available separately.
NOTE: Video will only play when the vehicle parking brake is engaged. The
parking brake wire must be connected for this feature to operate.
Figure 30. Connecting External Devices
35
VX3012
Right Audio
1
Left Audio
2
Ground
3
V ideo
4
3.5mm A/V Cable (not included)