Unload Cartridge - Brady BMP 53 Quick Start Manual

Load Cartridge
To load the cartridge:
1. Place your thumb in the
finger groove and push
up on the cover lip to
open the printer cover.

Unload Cartridge

To remove the cartridge:
1. Place your thumb in the
finger groove and push
up on the cover lip to
open the printer cover.
8/5/11
2. With the cartridge label facing up, drop the cartridge into
the cartridge well, pushing gently until it snaps into place.
Close the cover by pushing down on it until it snaps into
place.
Note: If using the shorter cartridge, hold the cartridge by
the fin when dropping into place.
2. Push down on the
cartridge eject button.
Setting Up the Printer
3. Placing your fingers in
the cartridge grip areas
(small depressions on the
side of the cartridge well)
grasp the cartridge and
pull it out.
Note: If using the shorter
cartridge, grab the
cartridge fin and pull up.
®
BMP 53 Quick Start Guide
7