Planet WNRT-300 User Manual page 47

Object
Enable Port Forwarding
IP Address
Protocol
Port Range
Comment
Check the "Select" box of which rule you want to delete, and then click the "Delete Selected" button to
delete it.
Figure 4-27 Port Forwarding
Enable Port Forwarding function
Add LAN IP address of specified host or server on the private local
network
Select the port number protocol type (TCP, UDP or both). If you are
unsure, then leave it to the default both protocol
Add ports you want to control. For TCP and UDP Services, enter the
beginning of the range of port numbers used by the service. If the
service uses a single port number, enter it in both the start and finish
fields.
The description of this setting
-41-
User's Manual of WNRT-300
Description