Table of Contents
Advertisement
User's Manual of WNRT-300
Figure 4-21
LAN Interface
Object
Description
IP Address
The LAN IP address of the WNRT-300, and default is 192.168.1.1. You
can change it according to your request.
Subnet Mask
Default is 255.255.255.0. You can change it according to your request.
Default Gateway
Default is 0.0.0.0. You can change it according to your request.
DHCP
You can select one of Disable, Client, and Server. Default is Server,
that the WNRT-300 can assign IP addresses to the computers
automatically.
DHCP Client Range
For the Server mode, you must enter the DHCP client IP address
range in the field. And you can click the "Show Client" button to show
the Active DHCP Client Table.
Static DHCP
Click the "Set Static DHCP" button, and you can reserve some IP
addresses for those network devices with the specified MAC
addresses anytime when they request IP addresses.
Domain Name
Default is Router.
802.1d Spanning Tree
You can enable or disable the spanning tree function.
You can input a MAC address here for using clone function.
Clone MAC Address
-35-
Advertisement
Table of Contents
