HP iPAQ rx3000 series User Manual page 69

Note:
Only empty folders can be deleted; therefore, you must
remove all files and sub-folders before deleting a folder.
Changing Video Settings
You can record video with audio using your HP iPAQ's built-in
camera. You can record in either MotionJPEG format or H.263
format (available only on the rx3700 series). With MJPEG, a
higher resolution of video can be captured, but it requires much
more memory space per minute of video. With the H.263 format,
lower resolutions must be used but longer video clips can be
stored in less memory space. The amount of video you can record
with your HP iPAQ is limited only by the amount of memory
space you have on your HP iPAQ or on an SD/MMC memory
card.
To access the Video Settings menu:
1. From the Start menu, tap Programs > HP Photosmart or
from the Launch page, tap Photosmart camera.
2. Tap > Video tab.
3. Select the video format (MJPEG or H.263).
4. Select the video size you want:
❏
MJPEG
◆
320x240
◆
176x144
◆
160x120
❏
H.263
◆
176x144
◆
128x96
5. Tap the Record audio checkbox to enable sound in the video.
6. Tap OK to exit the Video menu.
User's Guide
Using Your HP Photosmart Camera
5–14