Expansion Cards - HP iPAQ rx3000 series User Manual

Expansion Cards

For more information on expansion cards, refer to
"Expansion Cards."
Problem Solution
I cannot get my • Be sure you have firmly pushed the expansion card down
HP iPAQ into the HP iPAQ.
to recognize the
• Be sure you have inserted the appropriate card into the
expansion card.
appropriate slot.
• Be sure any third-party drivers are installed.
I cannot insert • Be sure the label is facing the front of the unit.
my card.
• Be sure you are not inserting the card at an angle.
• Be sure you insert the connection area first.
I cannot remove Push the SD card in to release the locking mechanism. The card
my SD card. will pop out slightly and can then be easily removed.
My HP iPAQ • Be sure you have loaded any drivers that came with the
cannot recognize expansion card you purchased.
my card.
• Reset the device by using the stylus to lightly press the
Reset button.
User's Guide www.hp.com
Troubleshooting
Chapter 11,
12–7