Page 1
T 350 T-Racer 12" Hard Surface Cleaner Designed for gasoline pressure washers with screw-on trigger guns up to 2650 PSI. 2.641005.0 5.961521.0 (05/05)
Page 2
5 Handle (2 piece) 3 Air flow control (hovering effect) 6 Adaptor Kärcher Support USA Call: 1-800-537-4129 for help or visit our website: www.karcher-usa.com/home Kärcher Customer Service CDN Call: 1-800-465-4980 for help or visit our website: www.karcher.ca Kärcher Support Mexico...
Keep all persons/animals clear of Intended Use the immediate vicinity of the cleaning head. The T 350 T-Racer can be used with all Kärcher gasoline pressure wash- Keep hands away from moving ers with 2400 to 2650 PSI and most parts.
Page 4
ASSEMBLY INSTRUCTIONS Step 1 Step 2 Insert upper handle into the lower Insert lower handle into main handle by twisting together. housing. Turn collar clockwise until tight. Step 3 Step 3 For Kärcher with male screw-on For female screw-on trigger gun. trigger gun.
OPERATION CONTROLS Spray Power Air Flow Control Adjust height of propeller spray head. Adjust the hovercraft effect of the T-Racer by pushing the Air Flow Con- For sensitive surfaces trol into one of the positions from No Turn nozzle height adjustment hovercraft effect...
Page 6
APPLICATION DIRECTIONS Suggested Settings for Typical Applications Horizontal Wood and Decks Adjust height of the spray head clockwise. Open the air flow vents. Vertical Wood, Siding and Facades Connect the T-Racer directly with the trigger gun. Adjust height of the spray head clockwise.
Page 7
2. Pull out the old nozzle. 3. Insert the new nozzle. 4. Secure nozzle with clamp. Kärcher Support USA Call: 1-800-537-4129 for help or visit our website: www.karcher-usa.com/home Kärcher Customer Service CDN Call: 1-800-465-4980 for help or visit our website: www.karcher.ca Kärcher Support Mexico...