Gateway e-4000 User Manual page 172

Chapter 7: Adding or Replacing Components
8
Reconnect the drive cables using your notes from Step 3. The red-striped
edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1
on the drive (typically on the side farthest from the power supply
connection). See the drive documentation for further instructions.
9
Close the case by following the instructions in "Closing the case" on
page 160.
To add or replace a 3.5-inch drive in the expansion bay:
1
Identify your computer case style. For more information, see "Identifying
your computer case style" on page 106.
2
Open the case by following the instructions in "Opening the case" on
page 157.
3
Pull up on the three bezel release tabs.
166
Bezel release tabs
www.gateway.com