Volume Adjustment; Audible Beep Confirmation; Resetting The System; Change Aspect Ratio - Jensen VX3020 Operating Instructions Manual

VX3020
Mute
Press the volume knob on the front panel or press the [MUTE] Button on the
remote control to mute the volume from the unit.
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder on the front
panel. When the volume level reaches "0" or
"so·:
a beep sounds, indicating that
the adjustment limit has been reached. The TFT screen displays the volume level
for 3 seconds.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The beep tone can be
disabled through the Setup menu.
Resetting the System
Soft Reset-
To correct a system halt or other illegal operation, use the tip of a pen to
press and release the reset button located just below the front panel control knob.
~[RESET]
Button
Figure 5. System Reset Button
For a Hard Reset- Touch the System Reset Icon on the Third Settings Screen.
After a system reset, the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the unit will return to Main Menu
once the reset is complete.
Change Aspect Ratio
Press the [WIDE] key on the remote control to adjust the aspect ratio.
Image Settings
1. Enter image setting mode by pressing the [PIC] Button on the remote control.
2. Select the item to be adjusted and touch the Left or Right direction icons
[ 1101 ]/[ Dl] on the user interface to adjust the value.
3. To exit image setting mode, press the [PIC] Button on the remote control again
or simply stop making adjustments.
. r
-:...' 1
!\"'
10
----
Brightness
m
H
10
Contrast
m
D
10
Saturation
..
ml
Jo•...-.r -
\..bU>.::.~-::,.-
Figure 6.1mage Settings Screen
16