Omron BP710CANN Instruction Manual page 20

ERROR MESSAGES AND TROUBLESHOOTING
Error Display Cause
Movement during
measurement and the
arm cuff has not been
inflated sufficiently.
The arm cuff was inflated
exceeding the maximum
allowable pressure, and
then deflated
automatically when
inflating the arm cuff
manually.
Movement during
measurement.
Clothing is interfering with
the arm cuff.
Device error.
Repeat measurement.
Remain still and do not talk during
measurement.
Refer to Taking a Measurement.
If "E2" appears repeatedly, inflate
the arm cuff manually until it is 30 to
40 mmHg
above your previous measurement
result.
Refer to Taking a Measurement.
Do not touch the arm cuff and/or
bend the air tube while taking a
measurement. Do not inflate the
arm cuff more than necessary.
Refer to Taking a Measurement.
Repeat measurement.
Remain still and do not talk during
measurement.
Refer to Taking a Measurement.
Remove any clothing interfering
with the arm cuff.
Refer to Applying the Arm Cuff.
Contact Customer Service.
20
Solution