Warning; Auto - Skoda Fabia Owner's Manual

Multifunction display details
Warning against excessive speeds
The multifunction display can only be operated when the ignition is switched on.
After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
The multi-functional indicator appears in the display
information display » page 15 depending on the equipment fitted to your vehi-
cle.
In vehicles with an information display
some of the information.

WARNING

Concentrate fully at all times on your driving! As the driver you are fully re-
■
sponsible for road safety.
Do not only rely upon the information given on the outside temperature dis-
■
play that there is no ice on the road. Even at temperatures around +4 °C, black
ice may still be on the road surface – warning, drive with care!
Note
In certain national versions the displays appear in the Imperial system of meas-
■
ures.
If the display of the second speed is activated in mph, the current speed is not
■
indicated in km/h on the display.
Memory
12
Using the system
» Fig. 5 on page 12 or in the
» page 15, there is an option to fade out
Fig. 5
Multifunction display

13 First read and observe the introductory information and safety warn-
ings on page 11.
14
The multifunction display is equipped with two automatic memories. The selected
memory is shown in the Display
The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis-
play. A 2 shown in the display means that data relates to the total distance mem-
ory (memory 2).
Switching over the memory takes place with the button
on the windshield wiper lever.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ig-
nition is switched on until it is switched off. New data will also flow into the cal-
culation of the current driving information if the trip is continued within 2 hours
after switching off the ignition. If the trip is interrupted for more than 2 hours,
the memory is automatically erased.
Total-trip memory (memory 2)
The total-trip memory gathers data from any number of individual journeys up to
a total of 19 hours and 59 minutes driving or 1 999 kilometres driven, and on vehi-
cles which are fitted with an information display up to a total of 99 hours and
59 minutes driving or 9 999 kilometres driven. The memory is deleted when ei-
ther of these limits is reached and the calculation starts all over again.
Unlike the single-trip memory, the total-trip memory is not deleted after a period
of interruption of driving of 2 hours.

Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is dis-
connected.
» Fig. 5.
» Fig. 6
B
on page 13
