Using Your Telephone - Alcatel OmniPCX 4028 User Manual

2

Using your telephone

Making a call
2.1
dial directly lift the number
the number receiver required
for your call
number programmed line
required key
To make an external call, dial the outside line access code before dialling your
correspondent's number. 9 is the default code for an outside line.
For the operator, dial '0' (by default).
If the internal or outside number does not reply:
LS announce Call back
broadcast a message on request callback to a
the loudspeaker of the busy terminal
free terminal
Text mail
send a voice message go to next screen
Receiving a call
2.2
Paul
is calling
lift the hands free press the key next to the
receiver 'incoming call' icon
hands free
Paul
Conversation 00:23'
correspondent's during a conversation
name
Text mail
send a written
message
Using the telephone in 'Hands free' mode
2.3
Terminal idle:
you are in hands free
mode
Press and
release
Call in progress:
Paul
Conversation 00:23'
during a press and release
conversation
During a conversation, you can lift the receiver without terminating the call.
Activating the loudspeaker during a conversation (receiver lifted) -
Loudspeaker.
2.4
Paul
Conversation 00:23'
during a activate loudspeaker
conversation (long press)
adjust volume deactivate
(7 levels) loudspeaker
(long press)
press and release the loudspeaker key to switch to hands free mode (light steady).
9
terminate
your call
the loudspeaker key flashes
the key is no longer lit