NETGEAR C6300 User Manual page 61

5. Click the Set Up Access List button.
6. Select the Turn Access Control On check box and select one of the following radio
buttons:
• Allow List. Allow computers and devices in the list to connect with WiFi.
• Deny List. Deny WiFi access to computers and devices in the list.
7. Click the Add button.
The screen displays a list of available wireless cards.
8. To add a device from the Available Wireless Cards list, do the following:
a. Select the device.
b. Click the Add button.
The device displays in the Wireless Card Access List.
9. To add a computer or device that is not in the list, do the following:
a. Type a name in the Device Name field.
b. Type the MAC address in the MAC Address field.
The MAC address is found on the computer or device.
c. Click the Add button.
The device displays in the Wireless Card Access List.
10. Click the Apply button.
Your changes are saved.
AC1750 WiFi Cable Modem Router
Specify Network Settings
61