NETGEAR C6300 User Manual page 22

• Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your cable Internet provider assigned. The gateway is the cable Internet
provider router to which your modem router connects.
8. Select a Domain Name Server (DNS) Address radio button:
• Get Automatically from ISP. Your Internet provider uses DHCP to assign your DNS
servers. Your Internet provider automatically assigns this address.
• Use These DNS Servers. If you know that your Internet provider requires specific
servers, select this radio button. Enter the IP address of your Internet provider's
primary DNS server. If a secondary DNS server address is available, enter it also.
9. Click the Apply button.
Your settings are saved.
Note: If you get address not found errors when you go to a website, it is
likely that your DNS servers are not set up correctly. Contact your
Internet provider to get the DNS server addresses.
AC1750 WiFi Cable Modem Router
Specify Initial Settings
22