SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
Ensure wheel bearings are clean and free of moisture.
Check headtube locknuts for tightness.
Inspect casters for cracks and wear (hub and rim).
Inspect front casters for cracked, bent or broken spokes.
Clean upholstery and armrests.
Check that all labels are present and legible. Replace if necessary.
Ensure the casters are free of debris.
Inspect/Adjust Weekly
Ensure that the wheel locks prevent the wheelchair from moving when engaged.
Inspect tires for flat spots and wear.
Inspect rear wheels for cracked, bent or broken spokes.
Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
Inspect front caster for cracked, bent or broken spokes.
Ensure the casters are free of debris.
Inspect/Adjust Monthly
Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
Check that the wheel locks do not interfere with tires when rolling.
Check that the wheel lock pivot points are free of wear and looseness.
Inspect seat and back for loose or broken hardware.
Inspect back cane hand grips for wear/looseness/deterioration.
Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
Ensure wheel bearings are clean and free of moisture.
Check headtube locknuts for tightness.
Ensure the casters are free of debris.
Inspect/Adjust Periodically
Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
Inspect frame and crossbraces for loose or missing hardware.
™
Veranda
18
Part No. 1148116