4412-00X
8. Remove ground strap screw.
Note: When you reassemble the unit, do not pinch or short the wire
harness.
ASF Assembly Removal
1. Remove the top cover assembly. See
Removal" on page
2. Remove paper support extension.
3. Release lower paper guide tabs.
4. Release upper paper guide tab.
5. Remove paper guide.
6. Remove paper deflector.
7. Release cables from guides located on ASF assembly.
8. Remove two screws.
9. Remove power supply.
page
4-11.
10. Remove the three screws from the ASF assembly.
4-5.
See"Power Supply Removal" on
"Top Cover Assembly
Repair Information
4-15