JVC KS-T807 Service Manual page 8

3.1.9 Removing the front board
(See Figs.10 to 12)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Remove the four screws L on the back side of the front
panel assembly. (See Fig.10.)
(2) Release the ten joints g and remove the rear cover. (See
Fig.11.)
(3) Take out the front board from the front panel assembly.
(See Fig.12.)
Caution:
Take care not to lose the springs.
1-8 (No.MA069)
Rear cover
Fig.10
Joints g
Rear cover
Joints g
Fig.11
Spring
Front panel assembly
Fig.12
L
Joints g
Joints g
Front board
Spring