JVC KS-T807 Service Manual page 18

3.2.21 Removing the side bracket assembly
(See Fig.33 to 37)
(1) Remove the eject cam plate spring.
(2) Push the joint f' through the slot to remove the load rack
downward.
(3) Move the eject cam limiter in the direction of the arrow to
release it from the boss g' of the side bracket assembly and
from the two joints h'.
(4) Move the eject cam plate in the direction of the arrow to re-
lease the joint i'.
CAUTION:
When reassembling, confirm operation of each part be-
fore reattaching the eject cam plate spring.
Eject cam plate spring
Side bracket assembly
Boss g'
Joint h'
Boss g'
Side bracket
assembly
Joint h'
Eject cam plate
1-18 (No.MA069)
Joint f'
Load rack
Fig.33
Eject cam limiter
Joint h'
Joint f'
Load rack
Fig.34
Eject cam limiter
Joint h'
Fig.35
Side bracket assembly
Boss g'
Eject cam plate
Fig.36
Side bracket assembly
Eject cam plate
Joint i'
Fig.37
Joint i'