Step
7. The keypad displays
Disable
ZONE 1
?
Bypass
ZONE 1
?
Select Another
Detector?
Step
8. If you have bypassed or disabled any of the detectors, the keypad displays:
Warning-Security
Reduced
for a few seconds, then returns to the start screen.
4.2 "Warning-Security Reduced" Message __________________________________________
The system will display the "Warning-Security Reduced" message when you bypass or
disable detectors, or if you try to turn on areas of the system when there are open zones
or detectors with faults.
If you see the following message, you can continue to turn your area(s) on, but you
should contact your installation company to get the problem detectors working as soon
as possible. See section 2.4 of the User's Guide for more information on turning areas on
when zones are open or detectors have faults.
Warning-Security
Reduced
To disable the detector, press
To see more options, press
To bypass the detector, press
If you press
To bypass or disable another detector, press
and then repeat steps 5 to 7.
To exit the Change Detector Setup menu, press
9
4: Changing the Setup of Detectors
.
. The keypad displays
.
, the keypad prompts
,
.