Panasonic CF-H2 series Operating Instructions Manual page 23

■
Starting Up
[Executing.Battery.
Recalibration].screen.
appears.
[Enter.Password].does.not.
appear.when.resuming.from.
sleep.or.hibernation.
Cannot.resume.
The.error.message."Debug.
Assertion.Failed!".appears.
Other.startup.problems.
. ●
The.Battery.Recalibration.was.canceled.before.Windows.was.shut.down.last.time..To.
start.up.Windows,.turn.off.the.computer.by.the.power.switch,.and.then.turn.on.
. ●
Select.[Enabled].in.[Password.On.Resume].in.the.[Security].menu.of.the.Setup.Utility.
( è . .Reference Manual."Setup.Utility").
. ●
The.password.you.have.set.in.the.Setup.Utility.is.not.requested.at.resuming..To.use.the.
password.security.at.resuming,.set.the.Windows.password.
A. Click. .(Start).-.[Control.Panel].-.[User.Accounts.and.Family.Safety].-.[Add.or.
remove.user.accounts].and.select.the.account,.and.set.the.password.
B. Click. .(Start).-.[Control.Panel].-.[System.and.Security].-.[Require.a.password.when.
the.computer.wakes].and.add.a.check.mark.for.[Require.a.password].
. ●
An.error.may.occur.when.the.computer.automatically.enters.the.sleep.or.hibernation.mode.
while.the.screensaver.is.active..In.this.case,.turn.off.the.screensaver.or.change.the.pattern.of.
the.screensaver.
. ●
If.you.press.and.hold.the.power.switch.for.4.seconds.or.longer,.the.power.will.be.turned.
off.forcibly.and.the.computer.will.not.resume..In.this.case,.all.unsaved.data.will.be.lost.
. ●
You.disconnected.the.AC.adaptor.and.the.battery.pack.while.the.computer.was.in.sleep..
If.the.computer's.power.supply.is.disconnected.in.sleep,.unsaved.data.will.be.lost.and.
the.computer.will.not.resume.
. ●
The.battery.is.exhausted..Sleep.and.hibernation.consume.some.power.
. ●
This.error.message.may.appear.in.the.following.cases.
•.
When.you.log.on.to.Windows.for.the.first.time.after.setting.up.Windows.with.First-time.
Operation.
•.
When.you.create.a.user.account,.and.log.on.to.Windows.for.the.first.time.using.that.
account.
•.
When.you.log.on.to.Windows.for.the.first.time.after.changing.[Trigger.Mode].in.
[Advanced].-.[Serial.Port.Settings].of.the.Setup.Utility.
In.such.case,.click.[Retry],.and.then.click.[Retry].on.the.next.error.message..The.same.
error.will.not.occur.again.after.performing.this.operation.
. ●
F9
Press. .in.the.Setup.Utility.( è .
Setup.Utility.settings.(excluding.the.passwords).to.the.default.values..Start.the.Setup.
Utility.and.make.the.settings.again.
. ●
Remove.all.peripheral.devices.
. ●
Check.to.see.if.there.was.a.disk.error.
A. Remove.all.peripheral.devices.including.an.external.display.
B. Click. .(Start).-.[Computer].and.right-click.[Local.Disk.(C:)],.and.click.[Properties].
C. Click.[Tools].-.[Check.Now].
•.
A.standard.user.needs.to.enter.an.administrator.password.
D. Select.the.option.in.[Check.disk.options].and.click.[Start].
E. Click.[Schedule.disk.check].and.restart.the.computer.
. ●
Start.the.computer.in.Safe.Mode.and.check.the.error.details..When.the.[Panasonic].boot.
screen.disappears* .at.startup,.press.and.hold.
1
Menu.is.displayed.
* . When.[Password.on.boot].is.set.to.[Enabled].in.the.[Security].menu.of.the.Setup.Utility,.
1
[Enter.Password].appears.after.the.[Panasonic].boot.screen.disappears..As.soon.as.you.
enter.the.password.and.press.
.Reference Manual."Setup.Utility").to.return.the.
F8
.until.the.Windows.Advanced.Options.
F8
.(Enter),.press.and.hold. .
23