Panasonic CF-H2 series Operating Instructions Manual page 21

Table of Contents

Advertisement

Using Recovery Disc
Use.the.Recovery.Disc.for.reinstallation.in.the.following.conditions.
•.
You.have.forgotten.the.administrator.password.
•.
Reinstallation.is.not.complete..The.recovery.partition.may.be.broken.
NOTE
. ●
To.change.OS.from.32.bit.to.64.bit,.or.vice.versa,.reinstall.OS.using.the.recovery.partition.in.the.hard.disk.
Preparation
. ●
Prepare.the.Recovery.Disc.( è .
. ●
Prepare.the.following.items:
•.
USB.DVD.drive.(optional).(refer.to.recent.catalogs.and.other.sources.for.information.about.the.products.available)
•.
Cradle.(optional:.CF-VEBH21U,.CF-VEBH21KU)
•.
External.keyboard
•.
Mouse
. ●
Remove.all.peripherals.
. ●
Connect.the.AC.adaptor.and.do.not.remove.it.until.reinstallation.is.complete.
1
Turn off the computer and set the computer to the Cradle.
2
Connect the DVD drive and an external keyboard and mouse to the USB port.
3
Turn on the computer, and press
The.Setup.Utility.starts.up.
. ●
If.the.[Panasonic].boot.screen.is.not.displayed,.turn.on.the.computer.while.holding.down.F2.or.Del.
. ●
If.the.password.is.requested,.enter.the.Supervisor.Password.
4
Write down all of the contents of the Setup Utility and press
At.the.confirmation.message,.select.[Yes].and.press.
5
Press
F10
.
At.the.confirmation.message,.select.[Yes].and.press.
The.computer.will.restart.
6
Press
F2
or
Del
The.Setup.Utility.starts.up.
. ●
If.the.password.is.requested,.enter.the.Supervisor.Password.
7
Set the Recovery Disc into the DVD drive.
8
Select the [Exit] menu, then select your DVD drive in [Boot Override].
9
Press
(Enter).
The.computer.will.restart.
10 Click [Reinstall Windows] and click [Next].
The.License.Agreement.screen.appears.
11 Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].
12 Select the settings and click [Next].
. ●
[Reinstall.Windows.to.the.whole.Hard.Disk.to.factory.default.].
Select.this.option.when.you.want.to.reinstall.Windows.to.the.factory.default..After.reinstallation,.you.can.create.
a.new.partition..For.how.to.create.a.new.partition,.refer.to."To.change.the.partition.structure".( è .page.16).
. ●
[Reinstall.to.the.first.3.partitions.]
Select.this.option.when.the.hard.disk.has.already.been.divided.into.several.partitions..For.how.to.create.a.new.
partition,.refer.to."To.change.the.partition.structure".( è .page.16).
You.can.keep.the.partition.structure..
.This.does.not.appear.if.Windows.cannot.be.reinstalled.to.the.partition.containing.boot.files.and.the.area.usable.by.Windows.
*2
13 At the confirmation message, click [YES].
Reinstallation.starts.
According.to.the.screen,.replace.the.Recovery.Disc..(It.will.take.approximately.50.minutes.)
. ●
Do.not.interrupt.reinstallation,.for.example.by.turning.off.the.computer..Otherwise.reinstallation.may.become.
unavailable.as.Windows.may.not.start.up.or.the.data.may.be.corrupted.
14 When termination screen is displayed, remove the Recovery Disc, and then click [OK]
to turn off the computer.
15 Turn on the computer.
. ●
If.the.password.is.requested,.enter.the.Supervisor.Password.
16 Perform the "First-time Operation" ( è page 14).
17 Start the Setup Utility and change the settings as necessary.
18 Perform Windows Update.
.Reference Manual."Recovery.Disc.Creation.Utility")
F2
while [Panasonic] boot screen is displayed.
*2
or
Del
while [Panasonic] boot screen is displayed.
.(Enter).
.(Enter).
.
F9
21

Advertisement

Table of Contents
loading

Table of Contents