Printer Introduction And Overview; Technical Support Information - Xerox Phaser 3250 Service Manual

General Information

Printer Introduction and Overview

Technical Support Information

1-2
The Xerox Phaser 3250 Laser Printer has a single-pass laser design
architecture, which offers mono print speed at 30-ppm, and resolution up to
1200 x 1200 dots-per-inch image quality. The printer supports PostScript 3
and PCL 6 for Base and Network configurations.
The Phaser 3250 provides a standard 250-Sheet Tray 1. The Manual Feeder
holds 1 sheet and does not act as a tray. The Manual Feeder supports
specialty media, card stock, and envelopes. The Output Tray holds 50 sheets
facedown.
The printer options add memory, media capacity, and functionality:
Memory upgrades are available to increase from 32 MB standard RAM up
to 160 MB maximum.
A 250-Sheet Feeder (Tray 2) is available as an option.
Automatic 2-sided printing is available and no tools are required to install
the Duplex Unit.
The Xerox Phaser 3250 Laser Printer Service Manual is the primary
document used for repairing, maintaining, and troubleshooting the printer.
To ensure complete understanding of this product, participation in Xerox
Phaser 3250 Service Training is strongly recommended. To service this
product, Xerox certification for this product is required.
For updates to the Service Manual, Service Bulletins, knowledge base, etc.,
go to:
Xerox Global Service Net: https://www.xrxgsn.com/secure/main.pl
Service Partners: http://www.office.xerox.com/partners
For further technical support, contact your assigned Xerox Technical Support
for this product.
Phaser 3250 Laser Printer Service Manual