General Troubleshooting
Power Supply Troubleshooting
AC Power Troubleshooting
4-8
Troubleshooting Reference Table
Applicable Parts
LVPS, PL1.1.4
Troubleshooting Procedure Table
Step
Actions and Questions
1
1. Check the voltage at the AC wall outlet.
2. Is there approximately 110 VAC (or
220 VAC if the printer is a 220 V
configuration) at the AC wall outlet?
2
1. Check the power cord for defects or loose
connection.
2. Is the power cord loose or defective?
Wiring and Plug/Jack References
"Map 7 - LVPS, HVPS, Fuser, Developer
Unit CRUM, and Power Switch" on
page 10-15
Yes
Go to step 2.
Replace or
reconnect the
power cord.
Phaser 3250 Laser Printer Service Manual
No
Notify the
customer of
improper AC
output from
the outlet.
Replace the
LVPS
(page 8-67).