Get Your Device Ready - HTC Touch Pro2 Get Started

Get Your Device Ready _

Insert the Battery
1. After removing the stylus, hold the device with both hands and push
the back cover upward with your thumb to remove the cover.
2. Align the battery's contacts with those inside the battery compartment
and gently push the battery into place.
3. Replace the back cover.
Insert a microSD Card (not included)
1. Remove the back cover. (See step 1 above.)
2. Insert the microSD card into the slot with the gold contacts facing
down. Carefully insert the card into the slot and gently press in until
the card clicks into place.
3. Replace the back cover.
Charge the Battery
1. Plug one end of the USB cable into the phone charger.
2. Plug the other end of the USB cable into the sync connector on
your device.
3. Plug the phone charger into an outlet.