Gfci Instructions; Using The Accessories - Kärcher K 205 M Plus Operator's Manual

Karcher operator manual high pressure washer
Hide thumbs Also See for K 205 M Plus:
Table of Contents

Advertisement

GFCI INSTRUCTIONS

Step 1
Plug the Ground
Fault Circuit Interrupter (GFCI)
into a working outlet.

USING THE ACCESSORIES

High/low spray wand
The High/low spray wand allows you to adjust the cleaning pressure. To clean at maximum
pressure, the High/low wand must be positioned to the high pressure setting (+).
To apply detergent, the wand must be positioned to the low pressure setting (-).
5
Dirtblaster
®
spray wand
This wand features a 0º pencil jet which rotates 360º
for maximum dirt cutting action, effectively increasing
cleaning performance up to 50%. This wand combines
the cleaning performance of a 0º pencil jet with the
surface coverage of a wide angle nozzle.
Not recommended for soft materials, siding, painted
surfaces, decks or autos.
Step 2
Press "TEST", then
press "RESET" to assure proper
connection to power.
For higher pressure turn wand
tip to the plus (+) position.
For lower pressure turn wand
tip to the minus (-) position.
Wash brush
This brush is ideal for removing stub-
born dirt and stains from finished sur-
faces. Use with detergents only.
NEVER POINT SPRAY NOZZLE AT
YOURSELF, OTHER PERSONS OR
ANIMALS
Note:
The actual
appearance
of the GFCI
may be
different from
this
illustration.
WARNING
TO AVOID SERIOUS INJURY,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents