Operation; Scope Of Delivery; Description Of The Appliance; Before Startup - Kärcher K 5.700 Operating Instructions Manual

Scope of delivery

The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.

Description of the Appliance

Illustrations on fold-out page!
1 Coupling element for water
connection
2 Water connection with integrated sieve
3 Appliance switch "0/OFF"/ „I/ON"
4 High pressure hose
5 Dosage regulator for detergent
6 Storage for trigger gun
7 High-pressure hose drum
8 Transport handle
9 Hand crank for hose drum
10 Storage of detergent reservoir with de-
tergent connection
11 Storage for accessories
12 Storage hook for mains connection ca-
ble
13 Mains cable with mains plug
14 Detergent reservoir with locking lid
15 Wheels
16 Trigger gun
17 Lock trigger gun
18 Key to detach the high pressure hose
from the trigger gun
19 Spray lance with pressure regulation
(Vario Power)
20 Spray lance with Dirtblaster
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.

Operation

Mount loose parts delivered with appliance
prior to start-up.
Install wheels
 Illustration
Push the wheels into the intake and se-
cure them with the plugs. Align the plug
properly.
Install the storage for hand-spray gun
 Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
 Illustration
Press in the storage hook and lock it
into the top position.
Install the transport handle
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration
Slide the transport handle into the guide
and secure it with 2 screws.
Install the dosage regulator for detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
– 9

Before Startup