Installing The Sensors On Your Bike - Magellan CYCLO 315 Series User Manual

Mounting the Device
3. To remove the device from the bike mount, rotate it
counterclockwise.

Installing the sensors on your bike

The cadence/speed sensor kit is used for selected models only.
1. Follow the instruction below to install the cadence/speed sensor kit
on your bike.
c
b
2. Ensure that the magnets are aligned with the sensing area on the
sensors.
3. When done, you can pair the sensor with
your device by tapping Main menu >
Settings > Sensors > Cadence/Speed.
Note: the sensors "sleep" when not in use to
conserve battery power. They "wake up"
when they receive their usual input - the
Speed/Cadence sensor must "see" a magnet
passing it a few times to wake up.
The sensor can only be paired within a few
minutes of "waking up", or it goes back to
sleep.
8
a
d
For both sensors (crank and
wheel):
Set clearance between
magnet and sensor
3-5 mm (1/8 - 3/16 inch)