4.
Using shims if needed, secure the forward mount to the handlebar.
5.
Re-install removed items and adjust as needed.
6.
See page 8 Mounting the Device to attach and remove the device
from the mount.
Installing the Pad-Style mount
The bike mount kit includes two types of rubber pads, allowing you to
attach the bike mount to your bike securely.
1. Select the rubber pad that best fits the handle bars on your bike and
then attach it using the two plastic straps.
2.
Align the latch on the back of the device with the slot on the bike
mount, and then rotate the device clockwise to lock the device to the
bike mount.
You can choose to mount the device on the handlebar (a) or on the
stem (b). See the following figure for the examples of mounting the
device.
7