Magellan CYCLO 315 Series User Manual page 24

• If you select a public
network, tap
directly to start connecting.
Note:
• On the WiFi settings screen, tap Refresh to search the networks again.
• You can add a network manually by tapping Add Network on the WiFi
settings screen. Enter the network name and complete the security setting,
and then tap to connect to the network.
4. When your device is connected to a wireless network, it starts to
synchronize data with MagellanCyclo automatically.
Please note that you need to register your device on MagellanCyclo.com
before using WiFi to synchronize data.
Note: You may see the landing page shown on the browser during connecting.
Follow the onscreen instruction to login and synchronize data.
5. When done, the sync result will be displayed in the message window.
Tap OK to return to the WiFi settings screen. The WiFi connection
will be disconnected automatically.
• If you select a network that is
secured with WEP/WPA-PSK/
WPA2-PSK, enter the password
and then tap .
6. The next time you enable the WiFi function, it will connect to a
previously accessed network automatically. You will not be prompted
to enter the password (if needed) again unless you (i) tap on the
network and then tap Forget this Network; or (ii) reset the device to
its factory default settings.
24