Sensors; Shimano Di2; Phone - Magellan CYCLO 315 Series User Manual

Sensors

Available sensors vary by model.
Sensor visibility is determined by type of selected profile -
for example, a Running profile shows only the heart rate
sensor, regardless of what other sensors may work with
your device.
Sensor settings apply to the currently selected profile.
The main screen icons for each sensor or function are
only displayed when the sensor or function is enabled in
the currently selected profile.
About sensors
The sensors "sleep" when not in use to conserve battery power. They
"wake up" when they receive their usual input. For example, the Heart Rate
Monitor's pads must firmly touch your skin for the sensor to wake up.
The sensor can only be paired while they are awake. If a sensor stops
receiving input, it goes back to sleep after a few minutes.
Pairing a sensor
When you pair a sensor, Cyclo stores the sensor ID and the name you
assign it for connection purposes.
1.
To pair a sensor, go to the Settings > Sensors screen, and make sure
the desired sensor is enabled. (Green checkmark)
2.
Tap the sensor button to see the Sensors page for that sensor.
It will show the ID for the sensor of that type most recently paired.
3.
Tap Pair new sensor to start pairing the sensor.
Once the connection is made, The sensor ID will be displayed in the
Connected Sensor ID field. On the main screen, the appropriate icon
/ / will display in the title bar.
For models with Indoor mode, you can pair your Cyclo with compatible
trainers. The Trainer sensor is only available when an Indoor profile is
active.
Note: The next time you start pairng to a sensor, it will attempt to pair to the last
sensor paired. To connect to a different sensor, tap Pair new sensor.

Shimano Di2

Compatibility
For selected models only. Requires Shimano's wireless
transmitter. See Shimano's resources for compatibility
requirement and possible update procedures.
http://e-tubeproject.shimano.com/index.html
Settings
• Cassette model: Select the proper cassette model.
• Cassette type: Select the proper cassette type.
• Crankset type: Select the proper crankset type.
• Battery status:
• When the Di2 sensor is connected, the current battery level is
displayed.
• When the battery level is 50%, the value flashes.
• When the battery level is 30% or lower, the value appears in red.

Phone

Tap the Phone option to turn on and off the Bluetooth
function of the device.
For more information, see the "Pairing with your
smartphone" section.
Note:
For selected models only.
/
29