Gfci Instructions; Using The Accessories - Kärcher K 240 Operator's Manual

GFCI INSTRUCTIONS

Step 1 Plug the Ground Fault Circuit
Interrupter (GFCI) into a working
outlet

USING THE ACCESSORIES

High/low spray wand
The High/low spray wand allows you to adjust
the cleaning pressure. To clean at maximum
6
pressure, the High/low wand must be
positioned to the high pressure setting (+).
To apply detergent, the wand must be
positioned to the low pressure setting (-).
For higher pressure turn wand
tip to the plus (+) position.
For lower pressure turn wand
tip to the minus (-) position.
Warning
TO AVOID SERIOUS INJURY, NEVER POINT SPRAY NOZZLE
AT YOURSELF, OTHER PERSONS OR ANIMALS
Step 2 Press "TEST", then press
"RESET" to assure proper
connection to power.
Dirtblaster
This wand features a 0º pencil jet which
rotates 360º for maximum dirt cutting action,
effectively increasing cleaning performance up
to 50%. This wand combines the cleaning
performance of a 0º pencil jet with the surface
coverage of a wide angle nozzle. Not
recommended for soft materials, siding,
painted surfaces, decks or autos.
Note:
The actual
appearance
of the GFCI
may be
different
from this
illustration.
®
spray wand