Installation; What You Need For Installation - HP High-Performance Secure Hard Disk Setup Manual

2

Installation

Use the information in this section to install the HP Secure Hard Disk in your compatible printer/MFP.
Once installed, you can use the HP embedded Web server (or HP Web Jetadmin) to manage the
HP Secure Hard Disk.
CAUTION:
by static electricity through electrostatic discharge (ESD). To prevent ESD damage, maintain
frequent contact with any bare sheet metal surface on the printer. A grounding wrist strap (or similar
device) is useful for this purpose. Handle the device carefully at all times. Avoid touching electronic
components or circuit paths
●

What you need for installation

●
Check printer/MFP operation
●
Backup data and note configuration settings
●
Erase existing hard disk data
●
Install the EIO HP Secure Hard Disk (J8019A)
●
Install the HP Secure Hard Disk lock adapter
● Install the HP Secure Hard Disk (J8018A)
● Confirm HP Secure Hard Disk operation
● Restore data and reinstall applications
What you need for installation
●
An HP printer/MFP with an available EIO slot or hard disk drive bay that supports an HP Secure
Hard Disk. See
and digital senders.
The HP printer/MFP must be functioning properly. If required, use the setup or installation guides
provided to assemble and test the printer/MFP.
ENWW
Your HP Secure Hard Disk contains electronic components that might be damaged
Table 1-1 Supported printers/MFPs on page 3 for a list of supported printers, MFPs,
What you need for installation 5