Maxtor ATA Hard Drive Installation Manual page 16

Existing System with Two ATAPI (CD/DVD/Zip) Drives
(See Figure 10 and "Installing an Additional Storage Drive or
Replacement Boot Drive (Windows 98, Me, 2000, XP)" on page 23.)
Cable Position
Primary Master, 0:
Primary Slave, 1:
Secondary Master, 0:
Secondary Slave, 1:
Existing System with Single ATAPI (CD/DVD/Zip) Drive and
Previously Installed Additional Storage Device
(See Figure 10 and "Installing an Additional Storage Drive or
Replacement Boot Drive (Windows 98, Me, 2000, XP)" on page 23.)
Cable Position
Primary Master, 0:
Primary Slave, 1:
Secondary Master, 0:
Secondary Slave, 1:
Device
Boot Drive
Additional Storage Drive (New Maxtor Drive)
CD-ROM
CD-ROM or DVD
Device
Boot Drive
Additional Storage Drive (Previously Installed)
Additional Storage Drive (New Maxtor Drive)
CD-ROM or DVD
Installing the Hard Drive
2
14