Oki Microline 520 Service Handbook page 38

10. You install a new control board in the printer. What are the indications of an incorrectly
positioned cut sheet / continuous sensor lever?
A. The unit will not power-ON.
B. All lamps on the operator panel light.
C. The ALARM lamp lights and F1 on the control board blows.
D. The ALARM lamp lights and the unit will NOT automatically load paper.
Correct Answer: D
Pages i-7 and i-8, Service Handbook, Rev 01 and 02 OLD QUESTION
Page 3-16, Service Handbook, Rev 03 NEW QUESTION
11. What is the recommended ambient temperature and relative humidity (RH) for the printer
while operating?
A. 41°F to 104°F, 20% to 80% (RH)
B. 41°F to 104°F, 10% to 70% (RH)
C. 41°F to 104°F, 20% to 50% (RH)
D. 41°F to 104°F, 20% to 90% (RH)
Correct Answer: A
Page 1-2, Service Handbook, Rev 01 and 02
Page 1-4, Service Handbook, Rev 03
12. The Microline 520 and Microline 521 printers allow you to print up to eight different bar
codes.
A. True
B. False
Correct Answer: A
Pages 84, Printer Manual and 1-8, Service Handbook, Rev 01 and 02
Page 1-7 and 1-8, Service Handbook, Rev 03
Course Administration i - 20 Microline 520/521 Service Handbook
P/N 59257803