Oki Microline 520 Service Handbook page 160

3.2.23 Idle Gear and Change Lever
1. Perform these procedures: 3.2.01, 3.2.06, 3.2.07, 3.2.16, 3.2.17, 3.2.19, 3.2.20, and
3.2.22.
2. Remove the idle gear (1). The idle gear is a large narrow gear.
3. Release the claw (2) of the change lever (3). The claw is accessed from inside the
unit.
4. Remove the change lever.
NOTE:
Lubrication
When lubricating, refer to Section 3.5 of this Service Handbook.
P/N 50805101 Lever: Change
P/N 51228201 Gear: Idle
Maintenance
RSPL
RSPL
3 - 48 Microline 520/521 Service Handbook
Both B.2.05
Both B.2.05
P/N 59257803