Oki Microline 520 Service Handbook page 188

Limited Operation
General Information
One of the menu selections that may be set by the end user is the operator panel function. This
is found in the Set-up Group of the menu. Operator Panel Function is an item in the Set-up
Group. This item may be set to either Full Operation or Limited Operation.
If the Operator Panel Function is set to Limited Operation the menu cannot be accessed and the
operator panel switches listed below are not active.
1. Print Quality
2. Character Pitch
The Operator Panel Function item is frequently set to Limited Operation on networks or other
areas where many users share a printer. Limited Operation prevents the printer settings from
being changed.
This item cannot be changed through the OKI
character pitch may be set through your software application packages.
Maintenance
software. However, the print quality and
SMART
3 - 76 Microline 520/521 Service Handbook
P/N 59257803